Drying tunnel 600 M UV
UV Drying Tunnel for Cylindrical Objects
The 600 M UV drying oven is one of the best systems that can be found on the market for curing UVA inks printed in containers with cylindrical bodies.
Unlike the UV 400 model, this unit is larger, which allows increasing the exposure time to radiation as well as drying larger diameter objects.
One of the main limitations of this equipment is the lengths of the lamps that define the area of exposure to the treatment. In this case, the system equips a 600 mm lamp which guarantees 50% more exposure to radiation, this accompanied by the speed regulation of the belt to allow high-level adjustments on really complex objects.
Easy regulation of the projector
The system allows the total regulation of the height, inclination and angle of the lamp in the area of projection on the objects.
Visual control of lamp consumption
Thanks to a galvanic indicator on the front panel of the machine we can see in real time the consumption of the lamp. This is the best way to know the state of the lamp and the state of the radiation that we are emitting towards the objects. At a glance we can see if any anomaly is happening inside the equipment.
Disconnector built into the machine panel
This will allow in the event of maintenance or periodic interventions to be able to completely disconnect the electrical connection of the appliance without having to intervene in the electrical panel.
Panelled hour counter
It is not necessary to mention the need to have an hour meter that allows us to see the life of the lamp in order to carry out adequate preventive maintenance.
The equipment has ingeniously arranged protection caps that allow the product size to be adjusted in the inlet mouth.
A polyethylene film curtain will be sufficient to guarantee the durability of the curtain and the leakage of light out of the equipment through the exit area.
Conveyor speed regulation
The electronic speed regulation system, located on the front of the panel, has the purpose of being able to easily adjust the required transport speed, as well as connect and disconnect the operation of the belt.
Thanks to having the conveyor tension adjustment and access controls located outside, periodic maintenance interventions practically disappear.
The conveyor is made of stainless steel sheets. This is so with the intention of guaranteeing maximum durability since stainless steel is one of the metals that has the best performance when exposed to ultraviolet radiation. It is true that making stainless is also one of the most expensive and difficult metals to work with.
Four industrial electric
As expected, the electrical panel of a system with these characteristics must be built in accordance with the quality standards in the industrial environment for which it has been designed.
Transformers with high electronic control capacity and obviously ventilation systems that guarantee unparalleled stability.
Lamp projection system built with maximum rigidity, lamps touched with mercury vapor. The ventilation system is linked to the current and temperature control system of the lamp that guarantees the life of the lamps for life, extracting a much higher performance in hours than usual.
According to the firm's policy, all products are matched so that their transport cost and security during the same are guaranteed. Packaging is always included in the cost of the product.
- ALIMENTACIÓN ELÉCTRICA
- 3 ,0 - 1,4 A
- AJUSTE VELOCIDAD
- ALTURA MÁXIMA DEL OBJETO
- SISTEMA DE CURADO
- 300 mm
- ANCHO DE LA BOCA DEL TÚNEL
- 1500x300 mm
- DIMENSIONES CINTA
- 600 mm
- LONGITUD ZONA DE SECADO
- A determinar
- ALTURA DE PUNTO DE CARGA
- A determinar
- DIMENSIONES EMBALAJE
- 200x90x220 cm
- POTENCIA SECADO UV
- 120 w/cm lineal
- ROTACION DE OBJETOS CILÍNDRICOS
- 220 Kg
- 169x77x201 cm