Features of the 9070 Halogen screen printing machine

Get high definition with long-lasting displays

Take full control of heatstroke

Halogen 9070 has a control panel where you can control the different parameters to ensure optimal photolyte development:

• Digital programmer to precisely control the insolation time.
• Ammeter to control the consumption and state of life of the lamp.

• On / off and exposure buttons (control over the shutter).

• High-pressure, high-flow vacuum pump with programmable actuator.

• Manual discharge valve

Shutter. Guaranteed precision and repeatability.

UV lamps have a slow warm-up and cool-down cycle, so they cannot be turned off and on instantly. For this reason, the lamp is kept on for optimum performance and it is the electromechanical shutter that controls the exposure time.

Forget about condensation problems

Halogen 9070 mounts a ventilation system that eliminates humidity from inside the equipment, thus avoiding condensation inside, avoiding reflections during insolation and oxidation problems over time.

Work without fear of accidental insolation of the emulsion

Inside Halogen 9070, a yellow safety light lamp has been installed that will allow us to work on it with films and photoliths, place and orient them and position ourselves on the frame with total safety, without risks to veil or affect the integrity of the photographic screen emulsion.

Gain speed with the vacuum pump

The 9070 Halogen insolator is equipped with a high-pressure pump, of superior quality compared to the pumps mounted on this type of equipment, in order to guarantee a stable and fast-acting vacuum. This pump is powerful and offers a fast and effective vacuum.

Quick discharge manual valve

As a consequence of the high suction capacity of the high pressure vacuum pump, it is necessary to have a discharge valve, manual in this case, to be able to open the lid after insolation. Halogen 9070 has a relief valve that quickly allows air access to the vacuum zone. The valve consists of a manual system located on the front control panel for easy access and actuation.

Durable and ergonomic solution

The Halogen 9070 is constructed of electrowelded steel. The lid mounts an industrial rubber blanket that, when closed, rests on a 10 mm thick glass. The lid can be comfortably raised and safely held open thanks to 2 oversized hydraulic shock absorbers.

The laboratory a clean place

It is assumed that the environment where the screens are insolated should maintain a minimum of cleanliness that makes it difficult to accidentally record peaks, particles and specks of dirt in the environment. The Halogen 9070 is equipped with wheels with brakes in order to be able to move it easily, from one point to another so that a clean environment can be maintained effortlessly, thus avoiding corners or areas of poor access that end up becoming a source of contamination with Over time.

Packaging

The whole set is supplied packed in a closed palletized wooden box (included in the price). Means of transport and lifting of the package may be necessary for its handling during transport (pallet truck, forklift, etc.). It is a stackable package that minimizes the cost of transport. The packaging is presented with measures of 100x128x120 cm.

Delivery time

This product is available in stock for immediate delivery, 12-24 h.